Search

    Sealing DELTA®-THENE

    Full-surface cold self-adhesive membrane (KSK) for sealing components in contact with the ground against soil moisture and non-pressing water.

    The standard-compliant building waterproofing made of a cross-laminated special HDPE carrier film and a sealing and adhesive layer made of bitumen rubber offers the ideal and permanent moisture protection for the building envelope.

    01 /09
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    Vertikale Anwendung von DELTA®-THENE
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    Verarbeitung von DELTA®-THENE
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    Vertikale Anwendung von DELTA®-THENE
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    DELTA®-THENE Abdichtung
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    Anwendung von DELTA®-THENE
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    DELTA®-THENE in vertikaler Anwendung
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    DELTA®-THENE Anwendung als Mauerwerkssperre
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    Horizontale Anwendung von DELTA®-THENE
    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27 xlarge 01:45:27
    DELTA®-THENE in der vertikalen Anwendung
      smallRetina 01:45:27
      Vertikale Anwendung von DELTA®-THENE
      smallRetina 01:45:27
      Verarbeitung von DELTA®-THENE
      smallRetina 01:45:27
      Vertikale Anwendung von DELTA®-THENE
      smallRetina 01:45:27
      DELTA®-THENE Abdichtung
      smallRetina 01:45:27
      Anwendung von DELTA®-THENE
      smallRetina 01:45:27
      DELTA®-THENE in vertikaler Anwendung
      smallRetina 01:45:27
      DELTA®-THENE Anwendung als Mauerwerkssperre
      smallRetina 01:45:27
      Horizontale Anwendung von DELTA®-THENE
      smallRetina 01:45:27
      DELTA®-THENE in der vertikalen Anwendung

    Advantages

    • Processing up to -5 degrees
      Together with the DELTA®-THENE KÄLTEGRUNDANSTRICH (Cold Basecoat) the use in winter up to -5°C is possible without any problems. Compared to other sealing materials, which can't be used at these temperatures, there are hardly any weather-related downtimes and waiting times.
    • Quick and easy processing
      DELTA®-THENE is quickly laid from the roll in the course of one work step. This means that it can be processed much faster than liquid sealing materials such as for example plastic-modified bitumen thick coatings (PMBC). The grid printing permits an easy cutting as well as a precise laying of the strips. The cutting is carried out quickly and easily by means of a cutter knife.
    • No setting and drying time
      Further work steps like for example the application of a protective/drainage membrane, such as for example DELTA®-TERRAXX, and/or insulation - may be carried out immediately. This eliminates long waiting times, and the work can be carried out more quickly by backfilling the construction pit.
    • It works immediately
      Waterproof and rainproof instantly after sticking on. No surprises when there is an unexpected weather change.
    • No layer thickness test needed
      DELTA®-THENE offers a maximum level of security due to a consistent layer thickness.
    • The material is highly flexible
      Any cracks or material changes in the subsurface can be safely overcome.
    • No open flame
      Welding devices aren't needed for the processing. That means: more work safety.
    • No problems connecting to wall barriers
      As the welding sheet can damage the wall barrier, the connection of a frequently used wall barrier with a welding sheet is not always possible. With DELTA®-THENE, the connection is very easy as the cold self-adhesive membrane adheres very well to almost all common plastics.
    • Conformity with standards
      Complies with the sealing standards DIN 18531 (balconies), 18533 (components in contact with the ground) and 18534 (wall and floor surfaces in wet rooms). All product property requirements to be uses as a seal according to DIN SPEC 20000-202 are met. CE conformity according to EN 13969 (bitumen sheeting for sealing buildings against soil moisture and water) and EN 14967 (bitumen wall barrier membranes).

    Application

    DELTA®-THENE can be used in the following areas of application:

    •  as vertical seal against soil moisture and non-pressing water for the floor and for walls in contact with the ground (in accordance with DIN 18533).
    •  as horizontal seal for balconies (according to DIN 18531), but also for wall and floor surfaces in wet rooms (according to DIN 18534).
    • as wall barrier (application type MSB-nQ) against capillary water in and under walls or as a base seal against splash water and soil moisture (according to DIN 18533).
    • as vapour barrier in the floor under screeds.
    • as an external vapour barrier on waterproof concrete walls.
    • for sealing the construction joints of filigree/triple waterproof concrete walls.
    • for flat sealing against radon gas.

    Processing

    The surface must be smooth, dry, dust-free, clean, pressure-resistant and load-bearing. Mineral surfaces must be pre-treated with a primer DELTA®-THENE GRUNDANSTRICH, DELTA®-THENE KÄLTEGRUNDANSTRICH or DELTA®-THENE GRUND INSIDE before applying DELTA®-THENE. Before laying the surface, all edges, covings etc. need to be prepared with cuts made of DELTA®-THENE or with the prefabricated DELTA®-THENE-BAND T 300/500 in such a way that all critical areas are made of two layers when the laying is complete. The laying of DELTA®-THENE happens track section to track section. Peel off the release paper in the back at the beginning of the track approx. 20 cm and bend it over sharply. Then align and glue on the web. The overlap between the strips must be 10 cm. All overlaps, connections and ends must be carefully reworked and pressed on with a pressure roller.

    Reference

    smallRetina 01:45:27 mediumAlias 01:45:27 large 01:45:27
    DELTA®-THENE in der Anwendung
    DELTA®

    Central archive LWL
    Münster, DE

    The cold self-adhesive sealing membrane DELTA®-THENE from DÖRKEN was able to prove itself in more than just one function during the new construction of the central warehouse of the Regional Association of Westphalia-Lippe (Landschaftsverband Westfalen-Lippe) in Münster-Coerde. For all details click here.

    Technical data

    Material Cold self-adhesive bitumen rubber as a sealing and adhesive layer with a cross-laminated special HDPE carrier film
    Thickness approx. 1,5 mm
    Weight approx. 1,6 kg/m²
    Servicetemperature range from -30 °C to + 80 °C
    Working temperature from +5°C to +30°C (air and surface). Up to -5°C with DELTA®-THENE KÄLTEGRUNDANSTRICH (COLD BASECOAT)
    Widths 1 m
    Roll length 5 m and 20 m
    Storage Transport and store upright, store dry and protect from direct sunlight
    Disposal EWC Code 1 703 02 Asphalt, tar-free
    Packaging recyclable
    Watertightness (EN 1928, Procedure B) passed (400 kPa/72 h)
    Reaction to fire (EN 13501-1) Fire class E
    Tensile strength (EN 12311-1) Lengthways: approx. 250 N/50 mm
    Crosswise: approx. 250 N/50 mm
    Tear resistance (nail shaft) (EN 12310-1) Lengthways: approx. 150 N
    Crosswise: approx. 150 N
    Flexibility at low temperature (pliability) (EN 1109) -30 °C
    Sd-value approx. 150 m
    Application type (DIN SPEC 20000-202) BA, MSB-nQ
    Water exposure class (DIN 18533) W1-E (W1.1.-E, W1.2-E) und W4-E
    Room usage class (DIN 18533) RN1-E bis RN3-E
    Crack class (DIN 18533) RÜ1-E bis RÜ3-E

    Accessories

    smallRetina 01:45:27 mediumAlias 01:45:27
    DELTA®-THENE KÄLTERGRUNDANSTRICH in der Anwendung

    DELTA®-THENE KÄLTEGRUNDANSTRICH (Cold primer)

    Primer specially designed for low temperatures for the product DELTA®-THENE. Can be used down to -5 °C.
    smallRetina 01:45:27 mediumAlias 01:45:27
    DELTA®-THENE-GRUND-INSIDE in der Anwendung

    DELTA®-THENE GRUND INSIDE

    Water-based special adhesive primer on pure acrylate base with high penetration effect - for absorbent mineral surfaces.
    smallRetina 01:45:27 mediumAlias 01:45:27
    DELTA®-THENE GRUNDANSTRICH bei der Verarbeitung

    DELTA®-THENE GRUNDANSTRICH (Primer)

    Hochwertiger und für die Verlegung von Kaltselbstklebebahnen optimierter Voranstrich zur Vorbereitung von mineralischen Abdichtungsuntergründen.
    smallRetina 01:45:27 mediumAlias 01:45:27
    DELTA®-THENE ECKE

    DELTA®-THENE ECKEN

    Prefabricated plastic moulded components for the secure sealing of inner and outer corners.
    smallRetina 01:45:27 mediumAlias 01:45:27
    DELTA®-THENE BAND

    DELTA®-THENE BAND T 300 / T 500

    Specially cut strips from DELTA®-THENE for laying, e.g. on edges, corners, coves and pipe penetrations.
    smallRetina 01:45:27 mediumAlias 01:45:27
    DELTA®-FLEXX BAND F100 in der Anwendung

    DELTA®-FLEXX BAND F100

    Connection and sealing tape with high adhesive strength and high flexibility at the same time - for details both outside and inside.
    smallRetina 01:45:27 mediumAlias 01:45:27
    Abdichten einer Kabeldurchführung mit DELTA®-FLEXX BAND FG 80 / FG 150

    DELTA®-FLEXX-BAND FG 80/150

    Adhesive tape for sealing the most difficult, three-dimensional details inside and outside, such as for example corners, edges, and openings.
    smallRetina 01:45:27 mediumAlias 01:45:27
    DELTA®-TERRAXX in horizontaler Anwendung

    DELTA®-TERRAXX

    Universal protection and drainage system for green areas that can be walked on or driven on and for vertical applications with installation depths of up to 10 m.

    Download

    PDF | 106.3 kB

    Declaration of Performance DELTA®-THENE

    PDF | 104.9 kB

    Declaration of Performance DELTA®-THENE after 14967

    External link to bimobject.com

    BIM Object DELTA®-THENE

    External link to bimobject.com

    BIM-Object External basement wall in concrete construction with DELTA®-THENE

    External link to bimobject.com

    BIM Object External basement wall with sand-lime brick and with DELTA®-THENE

    Contact form

    You can also use our contact form to send us your request.

    International contact

    Here you will find all the contact details of our international DÖRKEN Membranes subsidiaries and importers.