Search

    Ridge and arris roll DELTA®-VENT ROLL PRO

    The maximum air-permeable ridge and arris roll for safe ventilation in the ridge and arris area.
    Also suitable for longer rafter lengths. With additional sewn connection between middle and side sections.

    01 /01
    smallRetina 05:04:14 mediumAlias 05:04:14 large 05:04:14 xlarge 05:04:14
    DELTA®-PRO ROLL in der Anwendung als Firstrolle.
      smallRetina 05:04:14
      DELTA®-PRO ROLL in der Anwendung als Firstrolle.

    Advantages

    • Long term corrosion resistance
      The resistance of the metals used, tested under off-shore conditions according to VDA 621, ensures the long-term ventilation function.
    • High ventilation cross section
      The particularly high ventilation cross-section of approx. 650cm²/m ensures ventilation of the level below the roofing in accordance with the roofing rules.

    Application

    DELTA®-VENT ROLL PRO can be easily aligned and fastened thanks to the printed DELTA on it. Due to the high material stretch in the edge strips, it can also be optimally adapted to the covering material.

    The ridge and arris roll is laid in just a few steps:

    • Selection of the roll width depending on the profiling of the cover material.
    • The substrate must be dry and dust-free when laying. (In the case of old roof tiles / concrete roof tiles, prime with DELTA®-HF PRIMER if necessary)
    • Roll out the DELTA®-PRO ROLL and fasten it to the ridge/ridge batten.
    • Pull off the backing strip and press on the adhesive strip in the edge area.
    • Cover arris/ridge tiles. Ready!

    Technical data

    Field of Application Moisture and insect-proof ventilation in the ridge and arris area.
    Ventilation air gap approx. 650cm²/m
    Servicetemperature range from -30 °C to +80 °C
    Application temperature from +5 °C to +40 °C
    Material Highly tear-resistant aluminium, coated on both sides and stove-enamelled (edge area). Corrosion-resistant, fireproof aluminium fabric (central area). Butyl adhesive strips on both edges.
    Stretchability margin Material reserve (through pleating) approx. 50 %
    Substrate condition Stable, dry, free of grease, frost and dust
    Roll width 240 mm, 310 mm, 380 mm
    Roll length 5 m
    Packaging 4 rolls
    Colours black, red, brown

    Download

    PDF | 54.6 kB

    Technical data sheet DELTA®-PRO-ROLL

    Contact

    smallRetina 05:04:14 mediumAlias 05:04:14 large 05:04:14 xlarge 05:04:14

    Would you like information on detailed product properties, use cases or other technical topics?
    Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

    Do you have questions about prices, availability or the status of your order?
    Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.

    Contact form

    You can also use our contact form to send us your request.

    International contact

    Here you will find all the contact details of our international DÖRKEN Membranes subsidiaries and importers.