Façade membrane for open joints DELTA^®-FASSADE 50 (PLUS)

Diffusion-open façade membrane for open façades including up to 50 mm wide joints and a maximum joint proportion of 50% of the surface.

It is also suitable for metal and wooden stand constructions as it offers reliable protection of the façade against wind as well as moisture.

01 /07

DELTA®-FASSADE 50 PLUS in der Anwendung hinter einer Holzfassade

DELTA®-FASSADE 50 PLUS Illustration mit Holzfassade

DELTA®-FASSADE 50 PLUS Illustration mit Glasfassade

Advantages

Permanently UV-resistant
The excessive UV exposure may result in material fatigue or embrittlement of the material and impair the protective function of the façade membranes. Thanks to a special coating, with the product DELTA^®-FASSADE 50 (PLUS) you will benefit from a permanent UV resistance and will also be protected from such damage.
Flame retardant
The product DELTA^®-FASSADE 50 (PLUS) meets the requirements of the Euro fire class B-s1, d0. This is the highest class of flame-retardant membranes and means that in the event of a fire, it does not drip off and only causes a low level of smoke. This way you can guarantee the protection of houses and residents.
Vapour permeability
The SD value of the membrane of only approximately 0.02 m guarantees the vapour permeability from the inside. This guarantees the functional reliability of the structure as well as a permanently dry thermal insulation.

Reference

DELTA^®

SKY PARK
Bratislava, SK

The SKY PARK project in Bratislava impresses with its connection with its wider area. The solutions by DÖRKEN were used on the most striking elements of the whole project - on the facades as well as in the green areas.

DELTA^®

SPA BALNEA
Quebec, CA

The BALNEA SPA is located in the heart of the Eastern Townships, near Montreal, and presents itself with wood cladding. To optimally protect the surface behind the open joints against moisture and wind, DELTA^®-FASSADE 50 was installed here.

Technical data

Material	Specially coated, highly tear-resistant polyester fleece with a waterproof plastic coating and with adhesive zones placed on both edges. DELTA^®-FASSADE 50 without adhesive zones.
Suitability	For open façades with up to 50 mm wide joints and a maximum of joint proportion of 50% of the surface.
Reaction to fire	B-s1,d0, according to EN 13501-1
Tensile strength	approx.. 370/270 N/5 cm, EN 12311-1+2
Watertightness	Watertight W 1, EN 13859-1+2
Sd-value	approx. 0,02 m
Servicetemperature range	from -40 °C to +80 °C
Moisture resistance factor	approx. 0,028 m²hPa/mg
Weight	approx. 270 g/m²
Roll weight	approx. 20 kg
Roll size	50 m x 1.50 m