Foundation wall protection accessories DELTA®-BEFESTIGUNGSSCHRAUBE (FASTENING SCREW)

Assembly aid for fastening DELTA® protective and drainage membranes such as DELTA®-TERRAXX on perimeter insulation panels made of XPS from a minimum thickness of 60 mm.

    smallRetina 06:04:27
    DELTA®-TERRAXX SCHRAUBE

Advantages

  • Easy and secure fixing
    The fastening of studded and drainage sheets to the perimeter insulation takes place without any perforation of the sealing. This means less material waste, no temporary aid structures required for the temporary fastening of the sheets.

Application

Prerequisite: The perimeter insulation panels must be firmly glued to the subsurface and/or the sealing and stand on a stable subsurface at the base.
The fastening is carried out at the upper edge of the perimeter insulation at a distance of approximately 50 to 70 cm or from top to bottom on the entire insulated area with approximately 1 screw/sqm.
For this purpose, the DELTA®-BEFESTIGUNGSSCHRAUBE (Fastening screw) is pierced through the drainage membrane and then screwed into the insulation board. At breakthroughs such as for example light shafts, the screws are set as at the edges at a distance of approximately 50 - 70 cm.

Technical data

Material Patented plastic screw
Material requirement approx. 1 pieces/m² and/or approx. 3 pieces/m
Required tool Screwdriver with bit TORX 40
Packaging 50 pieces/box

Contact

smallRetina 06:04:27 mediumAlias 06:04:27 large 06:04:27 xlarge 06:04:27

Would you like information on detailed product properties, use cases or other technical topics?
Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

Do you have questions about prices, availability or the status of your order?
Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.